Deeply cultivating precision motion control: Huzhou Prim Semiconductor strengthens the core component base of wafer manufacturing process
On the industrial belt of coordinated development of the semiconductor industry in the Yangtze River Delta, Huzhou Prim Semiconductor Co., Ltd., established in 2023, is rooted in the West Lake Science and Technology Innovation Park in Changxing County, Huzhou, Zhejiang Province. At the same time, it has laid out a research and development production base in Wuxi, relying on nearly 10000 square meters of production and testing space, focusing on the transmission, positioning, and alignment needs of the entire wafer process. It has created a complete product matrix covering core categories such as wafer handling robots, ceramic forks, air floating rotating shafts, and precision motion table designs, providing solid local support for the independent and controllable development of the domestic semiconductor manufacturing industry chain.
Wafer Handling Robot: Efficient Transfer Core in Clean Environment
As the core executing component for the flow of wafers between various processes on the production line, the performance of the wafer handling robot directly determines the production efficiency and operational stability of the entire line. The series of wafer handling robots launched by Huzhou Prim Semiconductor breaks away from the path dependence of traditional solutions and achieves full chain autonomous research and development from mechanical modeling, material selection to motion control algorithms. The product adopts a lightweight and high-strength structural design, combined with a multi degree of freedom collaborative motion control algorithm, which can stably adapt to the handling requirements of 6-12 inch full specification wafers. It can still maintain extremely low vibration levels in high-speed transmission scenarios, and the repeated positioning accuracy reaches sub micron level. Compared with traditional equipment, the transmission efficiency is improved by more than 30%, which not only avoids subtle damage to the wafer edge, but also greatly reduces the waiting time between processes.
In response to the special requirements of semiconductor cleanrooms, this series of robotic arms has been specially designed in material selection and motion trajectory optimization, significantly reducing the generation of particulate matter during motion and fully meeting the usage standards of Class 1 cleanliness environments. At the same time, the equipment supports seamless integration with mainstream AMHS automatic material handling systems, and can be connected to the MCS material control system of wafer fabs to achieve efficient collaboration with OHT overhead cranes and Stocker storage systems. It completes precise wafer handover in complex production lines with hundreds of devices, helping to steadily improve production line utilization rates.
Ceramic fork: a clean load-bearing solution for contactless transportation
Ceramic fork, as the core component that directly contacts the wafer during wafer handling, its material properties and structural design directly determine the safety and cleanliness of wafer transportation. In response to industry pain points such as scratches, edge breakage, and dust pollution that are prone to occur during wafer handling, Huzhou Pulim has launched an air flow suspended ceramic fork, which is made of high-purity and high-density alumina or silicon nitride ceramic materials sintered together. It has extremely low thermal expansion coefficient and excellent wear resistance, and can effectively avoid wafer pollution caused by metal impurities precipitation in strong corrosive process environments such as etching and thin film deposition.
The internal design of the product features a precise sealed airway structure. During operation, compressed air forms a uniform and stable air film between the ceramic bearing surface and the wafer, relying on pressure difference to achieve non-contact suspension and adsorption of the wafer. There is no hard friction contact throughout the process, which fundamentally eliminates the risk of workpiece damage. At the same time, the R&D team has made special optimizations for the support force distribution of wafers of different sizes. By adjusting the thickness gradient and hollow structure of the fork through finite element simulation, the motion inertia is further reduced while ensuring overall rigidity, so that the wafer can always maintain a flat and stable posture during high-speed transfer, greatly reducing production abnormalities such as fragments and offsets. It fully complies with the clean production standards of semiconductor clean rooms. Currently, it has achieved deep adaptation with the company's independently developed wafer handling robot arm, forming a complete wafer transfer solution.
Air floating rotating shaft: the core technology breakthrough of non-contact lubrication
As a key rotating component of precision motion platforms, the performance of the air floating rotating shaft directly determines the stability of wafer rotation and leveling processes. Huzhou Prim has developed two mature product series for different application scenarios: the 6000rpm version for high-speed scenarios and the 1500rpm version for high-precision calibration scenarios. Both products achieve excellent performance with radial runout less than 250nm.
Based on the non-contact air film lubrication principle, there is no mechanical friction or wear during the operation of the air floating rotating shaft, which not only greatly extends the service life of the components, but also completely avoids the particle pollution generated during the operation of traditional mechanical bearings, fully adapting to the production requirements of semiconductor dust-free workshops. The R&D team has conducted multiple rounds of iterative optimization on the distribution of gas supply pressure, the layout of throttle holes, and the rigidity of the shaft system in the design of the air floating rotating shaft. This has enabled the shaft system to maintain stable rotational accuracy even under long-term continuous operation conditions. Currently, this series of products has completed batch verification in multiple wafer inspection and grinding equipment, and its operational stability has been recognized by multiple top customers.
Precision motion table design: system level innovation that breaks through precision boundaries
In the semiconductor manufacturing scenario, the precision motion table is the core subsystem that determines the upper limit of the entire equipment process and production yield. Its design difficulty focuses on balancing "high-speed motion" and "ultimate precision". The R&D team of Huzhou Pulim did not follow the route of relying solely on imported components for assembly. They independently designed from the bottom architecture and used natural high stability marble as the foundation. They innovatively integrated air floating static pressure technology and nano interference feedback compensation system, and achieved contactless operation through air bearings, reducing friction losses during operation to almost zero.
The entire system is equipped with a high-resolution laser interference closed-loop feedback system. Through a self-developed real-time pose compensation algorithm, it can dynamically correct the lateral and pitch deviations during motion, ultimately achieving a repeat positioning accuracy within 30 nanometers throughout the entire stroke. At the same time, it can maintain extremely low vibration and drift under high-speed acceleration and deceleration conditions. Unlike traditional ball screw transmission solutions, this independently developed linear motor-driven motion platform, through multi-dimensional design such as structural rigidity optimization, material thermal deformation suppression, and vacuum environment adaptation, not only meets the strict requirements of ultra precision micro adjustment in lithography and quantity detection processes, but also adapts to the long stroke and high dynamic response operation needs in advanced packaging processes, breaking the long-term technological monopoly of overseas manufacturers in the field of high-end precision motion tables.
From single point breakthroughs in core components to full chain integration at the subsystem level, Huzhou Prim Semiconductor is gradually building a precision motion control technology ecosystem that belongs to local manufacturers. With the continuous increase in demand for high-end equipment localization in downstream semiconductor production lines, domestically produced core components that combine precision advantages, localized service capabilities, and customized response speed will be validated and implemented in more application scenarios, injecting sustained momentum into the high-quality development of the domestic semiconductor industry chain.

Please first Loginlater ~